|
|
|
|
#1
04-02-2009, 08:43 PM
|
|||
|
|||
|
DOM tube
Anyone know a good place to buy this locally. I want to build some traction bars and need to buy some. Trying to avoid getting hosed on the deal. Still not sure if I should get 2" x .25" wall or 1.75" by .120 wall if they are around 5ft long. It is some pricey stuff for short lengths online. I would consider a full stick if the price is not crazy.
Tom
__________________
96 F250SC 4X4 AUTO
Swamps Babies, BTS Transmission, DP tuner live tuned
38R BB turbo, Custom electric fuel
Banks Intercooler,Tymar intake, Cowl Hood
4" Stainless Magnaflow/Aeroturbine exhaust,
14.92 @89.37 368hp and 650tq
RIP KIRK BECK 1955-2009
|
|
#2
04-03-2009, 05:32 AM
|
||||
|
||||
|
Tom,
Check any local metal fabrication shops, they should have that sort of thing in stock. Dave
__________________
97 F250HD 4x4 5spd, Reg Cab, Swamps 150's, TWildman tuned, 4" MBRP, 17* HPOP, Tymar, Dana 60 w/ RSK, OFFROAD DESIGN Crossover steering, sittin on 35's
|
|
#3
04-04-2009, 05:59 PM
|
||||
|
||||
|
Check with any "custom" offroad shops. They also might have it or could get it.
__________________
Jared Smith '95 F250, ex.c, LB, 5sp.,4x4, Luk flywheel&clutch, EliteDiesel tunes,Custom Production intake, SD intercooler, shimmed fuel reg., DIY stage 1 injectors, gutted EBPV, tymar 3x4 DP, empty cat, Custom Production 4.5" exhaust, 4" shackle reversal, 315 D. Cepecks w/ Micky T classic lock wheels, Ultralight gauges.
|
|
#4
04-04-2009, 08:38 PM
|
|||
|
|||
|
Tom,
I always go to Hinton Steel off Santa Fe and Evans for all my steel. If you're just building a track bar, I'd say that 1.75 .120 wall should be enough. 2" .250 wall is HEAVY. Christian
__________________
01' 7.3L, Gauges, ATS Housing, 4" MBRP, DIY Tymar, DP Tuner F5 LIVE TUNED.
|
|
#5
04-04-2009, 08:50 PM
|
|||
|
|||
|
Quote:
Do you have to buy full 20 ft sticks there and what might you guess on a price for this stuff. Tom
__________________
96 F250SC 4X4 AUTO
Swamps Babies, BTS Transmission, DP tuner live tuned
38R BB turbo, Custom electric fuel
Banks Intercooler,Tymar intake, Cowl Hood
4" Stainless Magnaflow/Aeroturbine exhaust,
14.92 @89.37 368hp and 650tq
RIP KIRK BECK 1955-2009
|
|
#6
04-05-2009, 09:51 AM
|
|||
|
|||
|
Tom, depending on what you're buying, you don't need to buy a full stick. I'd say for 1.75 DOM, you're safe to buy any length you want. I'd say maybe $4/foot. Call first, they'll give you a quote, then pick it up.
Christian
__________________
01' 7.3L, Gauges, ATS Housing, 4" MBRP, DIY Tymar, DP Tuner F5 LIVE TUNED.
|
|
#7
04-10-2009, 12:00 PM
|
|||
|
|||
|
Quote:
I called Hinton and it was $4.81 a foot $81.50 for a full stick and I think they said they only wanted to sell a full stick. C & M on Old Hampden in Sheridan was just under $4 a foot and would sell half sticks. I will probably run over there in a bit. Tom
|
|
#8
04-11-2009, 08:14 AM
|
|||
|
|||
|
Really? I buy partial sticks from those guys all the time. But when I'm looking for 1.75, it's usually in whole sticks. It's the odd size stuff that I always buy 5' or 7', etc.
I was at C and M yesterday. I should have just asked and called you to let you to be sure you had the DOM stuff, as I'm headed to Littleton today. Sorry I misinformed you, I'm surprised they don't sell it by the foot.
__________________
01' 7.3L, Gauges, ATS Housing, 4" MBRP, DIY Tymar, DP Tuner F5 LIVE TUNED.
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
